Force gauge user manual

Any zeroed deadload must be considered as part of the ultimate load. Model X Mechanical Force Gauge User Instructions. 5. General information and warnings. Although this instrument has a substantial overload protection rating, the instrument should not be used above the rated capacity. Dillon GL Electronic Force Gauge User Manual. Thank you for purchasing the Dillon Model GL Electronic Force Gauge. A force gauge is designed to measure forces inline with its load cell stem. This instrument may be used handheld, attached to a test stand or mounted to a fixture in order to measure force reactions and/or weight. Series 7 Digital Force Gauges User’s Guide. 3 debris. 7. When the gauge is not in use, ensure that the power is turned off. 2 POWER The gauge is powered either by an V NiMH rechargeable battery or by an AC adapter. Since the batteries are subject to self discharge, it may be necessary to recharge the unit after a prolonged period of storage.

User Manual Force Gauge PCE-DFG SeriesFurther Information:www.doorway.ru These force gauges store up to 1, data values in memory, which can be transmitted using USB or RS or out-put formats. The real time measuring mode is used to display force transients. Peak measuring mode captures the peak force achieved during a test. Select measuring units from lbf(ozf), kgf(gf), and N. the force gauge may result in injury and cause greater damage to the equipment. Be sure to use the specified power source. Do not allow foreign matter to fall onto the force gauge. If water or other liquid spills onto the force gauge, unplug the power cord immediately and contact technical support.

Place the gauge horizontally on a flat level surface without any accessories attached. Hold down the MAX key whilst turning the gauge on. The value displayed is the percentage difference (Loadcell offset) between the load currently present on the gauge and the gauges first ever calibration relative to full scale counts. DF II Series User Manual 9 POWERING GAUGE ON/OFF The DF II Series gauge has a dedicated power key. Depress the key to turn the gauge On or Off. When the gauge is turned on, the Chatillon® Splash Screen is displayed for approximately 5 seconds. This display shows the gauge model and capacity, firmwarerevision level, revision. connected to the force gauge. • Repairs and any necessary adjustments may only be conducted by qualified personnel. • Do not use the force gauge when any part of the enclosure has been removed. • Do not use the force gauge in potentially explosive atmospheres. • Do not use the force gauge in areas with a high humidity.